liquid cooling vs air cooling what is best for CPU
There are many fans in the PC for air cooling, graphics card fan, and CPU fan which is installed above the metal heat sink. Coolant-filled tubes, radiators, and water blocks are installed in the same liquid cooling.
It does not require much to install the air cooler in the CPU, in which the manufacturer only has to put two fans inside and outside. In addition, graphics cards and computer processors have fans. It is much cheaper than a liquid cooler.
Not only this, if you buy a bigger and better rig than this, you can still install air cooling setup in very less money. But if you use the PC for a long time, the heat sink will be increased due to which the air is cooled by applying air cooling.
For a liquid cooler you will need a pump, radiator and radiator fan. In this, the pump is attached to the tube by the radiator, circulating water or coolant from the pump to the radiator. Its greatest advantage over air cooling is that it can cool the system very quickly. Also it takes up much less space than before and there is also no noise.
However, there are some negative aspects such as its custom setup is very expensive. Along with this, planning has to be done before putting it in the CPU. For which a pre planning kit is required.
It requires a water block for the CPU that can fit into the socket, and the block and tubing must be of its size, as well as its tube, pump, resonator, radiator, radiator fan and coolant to match it. needed. If you want a different card for each loop, then you will have to buy an increased size for it. Because it is water, it dies.
If you want to do your work cheaply then you can use air cooler. And if you work long enough then you can use liquid cooler.